Name: Viking EVO self bailer X2
SKU: 11683
Availability: InStock

Warning: After each use, unzip the bottom compartment and inspect for any signs of water ingress. Ensure the compartment is completely dry before storage, and repair any damage promptly. Water trapped inside during prolonged storage can go undetected and result in severe hydrolysis damage.

Scupper Valves (SBV)
NEW

The SBV version features scupper valves. Close the valves to keep water out of the hull, or open them for efficient self-bailing performance.

If it’s primarily used for creeking, the baffle beneath the scupper holes can be permanently removed to significantly improve drainage efficiency.

With all scuppers positioned at the front of the Viking EVO, the SBV valves are easy to adjust while on the water.

Size

Item	Size
Length(outer)	383cm
Length(inner)	243cm
Width(outer)	100cm
Width(inner)	36cm

Item	Size
Water line(length)	368cm
Water line(Width)	96cm
Tube	32cm
Seat height	18cm

Weight

Item	Weight	Strength
Front seat	467g	70D 0.1mm TPU coated
Rear seat	472g	70D 0.1mm TPU coated
Backrest	263g*2	EVA foam backrest
Grab loop	36g	PCS
Skeg	86g	MRS design
5p thigh straps	573g*2	Silicone coated fabric CORDURA*30D
Inflation bag	200g	Size M 100L (840D High wave nylon)
Tie strap	25g	/

Notes

Measurement data may vary according to temperature and material difference, which is a normal phenomenon.

Patented Floor Design

Drainage holes are concentrated under the paddler’s foot.
The drainage hole at the bottom of the packraft is equipped with a shielding plate to reduce the holes resistance.
The entire bottom design is MRS patented design.
Patent number: 2023303907881

Comfortable Paddling Experience

The backrest and thigh straps can be freely adjusted to suit your height and body shape
Ultra-light anti-slip 5P thigh straps, which can be adjusted according to the paddler. It is designed to be fixed to the knees, and can be detached as long as the legs are straightened
Compared with the inflatable backrest, the EVA foam backrest has a stronger wrapping feel. You will have more choices for different rafting environments. The position can be adjusted according to the height of the paddler, adapting to most paddlers.

Hull designed for drifting waters

The hull has been optimized and adjusted based on patented packraft type–Barracuda R2 to provide a better experience for paddlers in rapid waters.

Internal Storage Bag (ISS Models)

Instructions for Use

1.Put equal weight within each storage bag on either side. As the bags cannot be accessed until deflation, only store items which do not require on-the-water access.

2.Put the luggage into the storage bag, fold the top of the bag, tighten the storage bag as much as possible, and then insert the buckle at the top opening.

3.Open the Tizip and put the storage bag inside the packraft tubes.

4.Unfasten the buckle at the top of the bag after the storage bags are inserted into the tubes, pass the buckles through the two tie downs and re-fasten the buckle.

Tie down fixings within the tubes can be used to fix the storage bags in place. This ensures that even as the packraft moves, the storage bags will not slide back and forth.